1-8 Zone Conventional Panel

All panels have a zone 1 non-latch facility to enable panel interlinking without "lock-up" occurring. The class change input enables the alarm circuits to operate without panel indication and panel latching.

The cabinet back-box houses only the transformer, thus providing a virtually empty enclosure for first fix installation. A steel gland plate, removable plastic grommets and ample space are designed to assist with cable termination.

A slide-in insert is included for clear zone identification. The surface-mount electronics motherboard is fitted and terminated after first fix installation.

Finally a terminal cover completes the panel installation. The 4, 8, 12 and 16 zone panels will accommodate up to 3 repeater panels, which are connected by a shielded 2-core data cable where the repeater panels are powered locally, or an additional 2-core may be run from the panel for power (Max. 1 repeater may be powered from the panel).

	Built-in detector removal indication facility
	From 1 to 16 zones
	4 Alarm circuits on 4, 8 12 & 16 zone panels
	Conforms to the requirements of EN54-2
	User-friendly access code
	One-man test facility
	Non-latching zone feature
	Class change input
	Earth fault monitoring
	Fully-functional repeater available (4, 8 12 & 16 zone panels only)
	Removable cable-entry grommets
	User-friendly controls
	Surface or semi-fl ush mounting as standard
	Ample termination space
	Flame-resistant polycarbonate enclosure
	Log book and manual supplied
	Complies with EMC and LVD directives

The C100 conventional panel may be supplied in 1, 2, 4, 8, 12 or 16 zone formats. It fully complies with the requirements of BS5839 part 4. All zones and alarm circuits are monitored for open and short circuit fault conditions with detector removal facility also provided as standard. The cabinet will house 2 x 12V 2.1AH S.L.A. batteries wired in series, which will sustain an 8 zone panel for up to 24 hours.