Base Call Systems	1-90 Zone Call System Tried, trusted and respected by users and installers alike, the Base Call System is ideal for use in all types of private, commercial, residential and public sector buildings. Incorporating two different disabled persons toilet alarm kits, a wide range of indicator panels and an extensive array of system components, it is without doubt one of the most versatile and reliable conventional call systems on the market.
	Hundreds of applications - suitable for use in hotels, leisure centres, nursing homes, shops, etc Hard wired for total reliability - 4 to 6 core security cable is ideal for most installations Wide range of indicator panels covering 1 to 90 zones. Extensive range of ancillaries including ceiling pulls, wallmounting call points, monitoring points, water resistant alert points, stainless steel call points, overdoor lights and sounders 12V d.c. system - simple to install, easy to operate and highly reliable Most wall-mounting plastic components fi t standard 25mm single or double gang back boxes Ceiling pulls and water resistant alert points are surface mountable All power supplies capable of 12V sealed lead acid battery charging Two levels of call - standard (constant tone) and emergency (intermittent tone) Optional button or magnetic key reset facilities (dependent on items purchased) Optional datalogging, paging and infrared call facilities

	ORDER CODE DESCRIPTION SINGLE ZONE EMERGENCY INDICATOR PANELS - Indicate standard and emergency calls NC941 Single zone call controller c/w 12V 250mA PSU & reset button NC941/SS Single zone call controller, s/steel c/w 12V 250mA PSU & reset button NC941B 0.3AHr battery backup kit, for use with single zone call controller 4-12 ZONE EMERGENCY INDICATOR PANELS - Indicate standard and emergency calls NC944 Four zone call controller c/w mute/reset button, requires 12V PSU NC944/SS Four zone call controller, s/steel c/w mute/reset button, requires 12V PSU NC930 12V 250mA PSU, powers up to 2 x four zone call controllers NC930/SS 12V 250mA PSU, s/steel, powers up to 2 x four zone call controllers NC941B 0.3AHr battery backup kit for use with 12V 250mA PSU NC925B1 12V 1A white boxed PSU, powers up to 3 x four zone call controllers AC284 2.1AHr backup battery, for use with 12V 1A boxed PSU 10-30 ZONE EMERGENCY INDICATOR PANELS - Indicate standard and emergency calls NC812KE 10 Zone Emergency master panel c/w 12V PSU, battery & mute button NC811KE 10 Zone Emergency repeater panel NC822KE 20 Zone Emergency master panel c/w 12V PSU, battery & mute button NC821KE 20 Zone Emergency repeater panel NC832KE 30 Zone Emergency master panel c/w 12V PSU, battery & mute button NC831KE 30 Zone Emergency repeater panel Larger panels available to order 10-30 ZONE STANDARD INDICATOR PANELS - Indicate standard calls only NC810K 10 Zone Standard master panel c/w 12V PSU & reset button NC811K 10 Zone Standard repeater panel NC820K 20 Zone Standard master panel c/w 12V PSU & reset button NC821K 20 Zone Standard repeater panel NC830K 30 Zone Standard master panel c/w 12V PSU & reset button NC831K 30 Zone Standard repeater panel Larger panels available to order OVERDOOR LIGHTS AND SOUNDERS - Can be used to increase call indication levels NC806C Overdoor light NC806CS Overdoor light & sounder NC806C/SS Overdoor light, s/steel NC806CS/SS Overdoor light & sounder, s/steel NC887D Switchable sounder NC888D Remote sounder STANDARD CALL POINTS - Generate standard calls only NC807C Ceiling pull unit, no on-board reset, no remote socket NC802DB Standard call point, button reset, with remote socket NC802DM Standard call point, magnetic reset, with remote socket NC917L Standard call push with button, no on-board reset, no remote socket NC802DEWM Master water resistant alert point, magnetic reset, no remote socket NC802DEWS Slave water resistant alert point, up to 10 per master NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket STANDARD MONITORING POINTS - Generate standard calls only NC894DKB Isolatable monitoring Point, button reset, no remote socket NC894DKM Isolatable monitoring Point, magnetic reset, no remote socket EMERGENCY CALL POINTS - Generate standard and/or emergency calls (as shown) NC802DEB-1/2 Emergency call point, button reset, with remote socket (can generate standard and emergency calls) NC802DEM Emergency call point, magnetic reset, with remote socket (can generate standard and emergency calls) NC802DEWM Master water resistant alert point, magnetic reset, no remote socket (can generate standard or emergency calls, not both) NC802DEWS Slave water resistant alert point, Max. 10 per master NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket (can generate standard or emergency calls, not both) NC804DE Emergency call / reset point, button reset, no remote socket (can generate emergency calls only) NC809DEM Emergency call / reset point, magnetic reset, no remote socket (can generate emergency calls only) INFRARED CALL POINTS & CEILING RECEIVERS - Generate standard and/or emergency calls when triggered by a compatible IR transmitter NC302RXC Infrared master ceiling receiver, no on-board reset, no remote socket NC302RXCS Infrared slave ceiling receiver, up to 3 per master NC802DERB Infrared call point, button reset, with remote socket NC802DERM Infrared call point, magnetic reset, with remote socket INFRARED TRANSMITTERS - For use with infrared call points & ceiling receivers NC312RXA Infrared transmitter, push/pull for emergency call NC312RXCA Infrared transmitter, push for standard call / pull for emergency NC312RXC Infrared transmitter, push for standard call only NC312BM Battery module for transmitter RESET POINTS - Can be used to reset devices which do not have an on-board reset facility NC809DB Button reset point NC809DB/SS Button reset point, s/steel NC809DM Magnetic reset point NC899IRR Keyswitch reset point MAGNETIC RESET KEYS - For use with all magnetic call points, monitoring points and reset points NC803M/10 10 x magnetic reset keys NC803M/50 50 x magnetic reset keys ANCILLARY CALLING DEVICES - Generate standard call via a call point’s remote socket NC805C/6 1.8m (6ft) tail call lead NC805C/14 4.2m (14ft) tail call lead NC805D 1.2-3.6m (4-12ft) tail call lead NC805P Hand/foot pneumatic pad, requires 1 x NC805AS NC805AS Remote air switch for NC805P NC805MD Portable movement detector MISCELLANEOUS 800 SERIES DEVICES NC899KD Area isolator (can be used to isolate areas/zones) NC884DE Emergency 5:1 input expander (can be used to provide area/zonal indication) NC885 Standard 5:1 input expander (can be used to provide area/zonal indication) NC889 Call latch module (can trigger a stnd call from a n/o or n/c switch) NC889ERM Multi-purpose call latch module, (can trigger a stnd and/or an emergency call from a n/o or n/c switch) NC883D 12V relay unit (can be used to switch sirens, strobes, etc.) NC848/50 50 x Anti-tamper screws (can be used to secure stainless steel devices in high risk environments) NC947 Allen key for use with NC848 anti-tamper screws DATALOGGING & PAGING EQUIPMENT DP800KPD Datalogger c/w software & printer DP800KD Datalogger c/w software, no printer DP830K 30 zone interface kit (one required per 30 zones on DP800KPD or DP800KD datalogger) DP874DA Transmitter for alpha pagers (must be used in conjunction with a DP800KPD or DP800KD) DP877A Alpha display pager, group 1, (for other pager groups add B,C,D,E,F,G or H to the order code) DP874B/4 Tone only UHF paging transmitter (supplied with one tone-only pager) DP875/4 Extra tone-only pager