XPander Radio Alarm System
	XP95 range expansion Intelligent and wireless Eliminates cable problems Minimises disruption Enables rapid retrofit Easy to install XPERT card addressing Self monitoring Proven technology No special control panel needed 868MHz radio channels Up to 15 devices per interface Up to 5 interfaces per loop

XPander can be incorporated into fire detection systems in stately homes and architecturally sensitive buildings where the use of fire cables is either impracticable or undesirable.

XP95 detectors are often installed in buildings where wiring presents a challenge, most often because the fabric of the building or its design will be negatively affected by the use of cables. It is sometimes very difficult to introduce cable runs into buildings which were not designed for the modern age. It is for buildings of this kind that XPander has been developed
XPander is a system in which individual detectors, caIl points and alarm devices communicate with the XP95 loop by radio signals. An interface is connected to the loop in the same way as any other interface, such as an Input/Output Unit. Every XPander device is assigned an address and this address is recognised by the control panel in the same way as is the address of any device connected directly to the loop wiring.